JINHUA OUYALI METAL PRODUCTS CO.,LTD

Biomass Heating Furnace Is Practical

Apr 13, 2022

Biomass particle heating furnace mainly takes agricultural and forestry processing wastes such as sawdust, straw, rice husk, bark and other biomass as raw materials, which are solidified into high-density granular fuel through pretreatment and processing. Biomass granulator is divided into flat model biomass granulator and ring model biomass granulator.

Biomass fuel is a block of environmental protection new energy produced by the processing of straw, straw, rice husk, peanut shell, corncob, Camellia oleifera shell, cottonseed shell and "three residues". The diameter of biomass particles is generally 6 ~ 10mm. According to the classification standards of biomass particles in Sweden and the European Union, if the intermediate classification value is taken as an example, biomass particles can be roughly described as the following characteristics:

The diameter of biomass particles is generally 6 ~ 8mm, the length is 4 ~ 5 times of its diameter, the crushing rate is less than 1.5% ~ 2.0%, the dry basis water content is less than 10% ~ 15%, the ash content is less than 1.5%, the sulfur content and chlorine content are less than 0.07%, and the nitrogen content is less than 0.5%.

If additives are used, they shall be agricultural and forestry products, and the type and quantity used shall be indicated. The EU standard does not propose a specific value for the calorific value of biomass particles, but requires the seller to mark it.


goTop